工程專業翻譯

㈠ 專業工程翻譯

Center rod, tension, arc-side tooth position, centrifugal impeller, end teeth with the surface, Shun course, wrong gear, computer-assisted, two octave, beating the value of

㈡ 英語翻譯(工程類的)

數量單上提供的是個大概數，臨時作投標參考依據。付款時根據工程訂單和執行的實際數量來進行，通常由承包商來測定，由工程師核實，如無異議，就根據數量單上規定的費稅和投標價格來計算具體金額；否則，工程師會在合同准許的范圍對那些費稅和價格進行調整；重大物料（如鋼管、電磁表、閥門）的費稅和價格將會依據技術參數的相關條款在物料被送至工地現場時當即進行計算。

㈢ 土木工程專業英語全文翻譯

Introction to Civil Engineering Papers

Civil Engineering for the development of a key role, first as a material foundation for the civil engineering construction materials, followed by the subsequent development of the design theory and construction technology. Every time a new quality of building materials, civil engineering will be a leap-style development.
People can only rely on the early earth, wood and other natural materials in the construction activities, and later appeared in brick and tile that artificial materials, so that the first human to break the shackles of natural building materials. China in the eleventh century BC in the early Western Zhou Dynasty created the tile. The first brick in the fifth century BC to the third century BC, when the tomb of the Warring States Period. Brick and tile better than the mechanical properties of soil, materials, and easy to manufacture.
The brick and tile so that people began to appear widely, to a large number of housing construction and urban flood control project, and so on. This civil engineering technology has been rapid development. Up to 18 to the 19th century, as long as two thousand years, brick and tile has been a major civil engineering construction materials, human civilization has made a great contribution to the even was also widely used in the present.
The application of a large number of steel procts is the second leap in civil engineering. Seventeen 1970s the use of pig iron, the early nineteenth century, the use of wrought iron bridges and the construction of housing, which is a prelude to the emergence of steel.
From the beginning of the mid-nineteenth century, metallurgical instry, smelting and rolling out high tensile and compressive strength, ctility, uniformity of the quality of construction steel and then proce high-strength steel wire, steel cables. As a result of the need to adapt to the development of the steel structure have been flourishing. In addition to the application of the original beam, arch structure, the new truss, a framework, the structure of network, cable structures to promote the graal emergence of the structure of Yan in the form of flowers.
From the brick building long-span structures, stone structures, a few meters of wood, steel structure to the development of tens of meters, a few hundred meters, until modern km above. So in the river, cross the bridge from shelves, on the ground since the construction of skyscrapers and high-rise tower, even in the laying of underground railway, to create an unprecedented miracle.
In order to meet the needs of the development of steel works, on the basis of Newton's mechanics, material mechanics, structural mechanics, structural engineering design theory came into being, and so on. Construction machinery, construction technology and construction organization design theory also development, civil engineering from the experience of rising to become science, engineering practice and theoretical basis for both is a different place, which led to more rapid development of civil engineering.
During the nineteenth century, 20, made of Portland cement, concrete has come out. Concrete can aggregate materials, easy-to-concrete structures forming, but the tensile strength of concrete is very small, limited use. By the middle of the nineteenth century, the surge in steel proction, with the emergence of this new type of reinforced concrete composite construction materials, which bear the tension steel, concrete bear the pressure and play their own advantages. Since the beginning of the 20th century, reinforced concrete is widely used in various fields of civil engineering.
From the beginning of the 1930s, there have been pre-stressed concrete. Pre-stressed concrete structure of the crack resistance, rigidity and carrying capacity, much higher than the reinforced concrete structure, which uses an even wider area. Civil Engineering into the reinforced concrete and prestressed concrete dominant historical period. Concrete buildings to bring about the emergence of new economic, aesthetic structure in the form of engineering, civil engineering so that a new construction technology and engineering design of the structure of the theory. This is another leap in the development of civil engineering.
A project to build the facilities in general to go through the investigation, design and construction in three stages, require the use of geological prospecting projects, hydro-geological survey, engineering survey, soil mechanics, mechanical engineering, engineering design, building materials, construction equipment, engineering machinery, building the economy , And other disciplines and construction technology, construction and other fields of knowledge, as well as computer and mechanical testing techniques. Civil engineering is therefore a broad range of integrated disciplines. With the progress in science and technology development and engineering practice, the civil engineering disciplines have also been developed into a broad connotation, the number of categories, the structure of complex integrated system.
Civil Engineering is accompanied by the development of human society developed. It works in the construction of facilities reflect the various historical periods of socio-economic, cultural, scientific, technological development outlook, which civil society has become one of the historical development of the witness.
In ancient times, people began to build simple houses, roads, bridges and still water channel to meet the simple life and proction. Later, in order to adapt to the war, proction and dissemination of religious life, as well as the needs of the construction of the city, canals, palaces, temples and other buildings.
Many well-known works shown in this historical period of human creativity. For example, the Great Wall of China, Dujiangyan, the Grand Canal, Zhaozhou Bridge, Yingxian Wooden Tower, the pyramids of Egypt, Greece's Parthenon, Rome's water supply project, colosseum amphitheater (Rome large animal fighting Field), as well as many other well-known churches, palaces and so on.
After the instrial revolution, especially in the 20th century, on the one hand, civil society to put forward a new demand; On the other hand, all areas of society for the advancement of civil engineering to create good conditions. Thus this period of civil engineering has been advanced by leaps and bounds. All over the world there have been large-scale modernization of instrial plants, skyscrapers, nuclear power plants, highways and railways, long-span bridges, and large-diameter pipelines long tunnel, the Grand Canal, the big dams, airports, port and marine engineering, etc. . For civil engineering continually modern human society to create a new physical environment, human society, modern civilization has become an important part.
Civil Engineering is a very practical subjects. In the early days, through the civil engineering practice, summing up successful experience, in particular, to draw lessons from the failure of developed. From the beginning of the 17th century, with Galileo and Newton as a pilot with the mechanics of the modern civil engineering practice, graally formed the mechanical, structural mechanics, fluid mechanics, rock mechanics, civil engineering as the basis of theoretical subjects. This experience in civil engineering from the graally developed into a science.
In the course of the development of civil engineering, engineering practice often first experience in theory, engineering accidents often show a new unforeseen factors, triggering a new theory of the research and development. So far a number of projects dealing with the problem, is still very much rely on practical experience.
Civil Engineering Technology with the main reason for the development of engineering practice and not by virtue of scientific experiments and theoretical studies, for two reasons: First, some of the objective situation is too complicated and difficult to faithfully carry out laboratory or field testing and analysis. For example, the foundation, tunnel and underground engineering and deformation of the state and its changes over time, still need to refer to an analysis of engineering experience to judge. Second, only a new engineering practice in order to reveal new problems. For example, the construction of a high-rise buildings, high-rise tower and mast-span bridges, wind and earthquake engineering problems highlighted in order to develop this new theory and technology.
In the long-term civil engineering practice, it is not only building great attention to the arts, has made outstanding achievements; and other works, but also through the choice of different materials, such as the use of stone, steel and reinforced concrete, with natural Environmental art in the construction of a number of very beautiful, very functional and good works. Ancient Great Wall of China, the modern world, many of the television tower and the bridge ramp Zhang, are cases in point.
A building is closely bound up with people，for it provides with the necessary space to work and live in .
As classified by their use ,buildings are mainly of two types :instrial buildings and civil buildings .instrial buildings are used by various factories or instrial proction while civil buildings are those that are used by people for dwelling ,employment ,ecation and other social activities .
Instrial buildings are factory buildings that are available for processing and manufacturing of various kinds ,in such fields as the mining instry ,the metallurgical instry ,machine building ,the chemical instry and the textile instry . factory buildings can be classified into two types single-story ones and multi-story ones .the construction of instrial buildings is the same as that of civil buildings .however ,instrial and civil buildings differ in the materials used and in the way they are used .
Civil buildings are divided into two broad categories: residential buildings and public buildings .residential buildings should suit family life .each flat should consist of at least three necessary rooms : a living room ,a kitchen and a toilet .public buildings can be used in politics ,cultural activities ,administration work and other services ,such as schools, office buildings, parks ,hospitals ,shops ,stations ,theatres ,gymnasiums ,hotels ,exhibition halls ,bath pools ,and so on .all of them have different functions ,which in turn require different design types as well.
Housing is the living quarters for human beings .the basic function of housing is to provide shelter from the elements ,but people today require much more that of their housing .a family moving into a new neighborhood will to know if the available housing meets its standards of safety ,health ,and comfort .a family will also ask how near the housing is to grain shops ,food markets ,schools ,stores ,the library ,a movie theater ,and the community center .
In the mid-1960』s a most important value in housing was sufficient space both inside and out .a majority of families preferred single-family homes on about half an acre of land ,which would provide space for spare-time activities .in highly instrialized countries ,many families preferred to live as far out as possible from the center of a metropolitan area ,even if the wage earners had to travel some distance to their work .quite a large number of families preferred country housing to suburban housing because their chief aim was to get far away from noise ,crowding ,and confusion .the accessibility of public transportation had ceased to be a decisive factor in housing because most workers drove their cars to work .people we』re chiefly interested in the arrangement and size of rooms and the number of bedrooms .
Before any of the building can begin ,plans have to be drawn to show what the building will be like ,the exact place in which it is to go and how everything is to be done.
An important point in building design is the layout of rooms ,which should provide the greatest possible convenience in relation to the purposes for which they are intended .in a dwelling house ,the layout may be considered under three categories : 「day」, 「night」 ,and 「services」 .attention must be paid to the provision of easy communication between these areas .the 「day 「rooms generally include a dining-room ,sitting-room and kitchen ,but other rooms ,such as a study ,may be added ,and there may be a hall .the living-room ,which is generally the largest ,often serves as a dining-room ,too ,or the kitchen may have a dining alcove .the 「night 「rooms consist of the bedrooms .the 「services 「comprise the kitchen ,bathrooms ,larder ,and water-closets .the kitchen and larder connect the services with the day rooms .
It is also essential to consider the question of outlook from the various rooms ,and those most in use should preferably face south as possible .it is ,however ,often very difficult to meet the optimum requirements ,both on account of the surroundings and the location of the roads .in resolving these complex problems ,it is also necessary to follow the local town-planning regulations which are concerned with public amenities ,density of population ,height of buildings ,proportion of green space to dwellings ,building lines ,the general appearance of new properties in relation to the neighbourhood ,and so on .
There is little standardization in instrial buildings although such buildings still need to comply with local town-planning regulations .the modern trend is towards light ,airy factory buildings .generally of reinforced concrete or metal construction ,a factory can be given a 「shed 」type ridge roof ,incorporating windows facing north so as to give evenly distributed natural lighting without sun-glare .

㈣ 關於工程類的專業英語翻譯一段摘要，不要百度和有道。無錯採納。謝謝

SMW method (Soil Mixing Wall) method, also called reinforced soil-cement Mixing Wall method. SMW continuous wall in Japan in 1976, developed by the Japanese ChengXin instrial co., LTD. SMW construction wall thickness is small, fast, small influence on surrounding environment. And its economic, applicable and environmental advantages and more and more widely used, especially suitable for as the retaining structure of deep foundation pit in soft soil area. This paper combined with the application of SMW in a foundation pit enclosure, detailed elaborated the SMW process, construction quality assurance measures, exception handling, and their successful utilization in urban construction are put forward SMW shows it has broad application prospects.
Keywords: reinforced soil-cement mixing wall (SMW method）; Pit supporting; Supporting structure; Urban construction

㈤ 「市政工程」這個專業用英語怎麼翻譯

翻譯是：Municipal Engineering。

市政工程專業是培養熟悉市政工程結構理論，具有市政工程施工能力，掌握市政工程施工組織設計及市政工程造價編制方法，直接從事城鎮給排水工程、污廢水處理工程、道路與橋梁工程施工的高級應用性專門技術人才。

解釋：
municipal engineering
英[mjuˈnisipəl ˌendʒiˈniəriŋ] 美[mjuˈnɪsəpəl ˌɛndʒəˈnɪrɪŋ]
[詞典] 市政工程（專業）;
[例句]Study on the Municipal Engineering Information Security System Based on Technology of SSL and GIS
基於SSL和GIS技術的市政工程信息安全體系研究

㈥ 請高手幫忙!(工程專業翻譯）

兩位，這種譯法是直譯，不適合工程上使用的，我們在國外施工時也都是用很簡單的用語提醒人們的，沒有這么復雜，不過樓主要求太多了，不能滿足！

比如最後一句話，我們在現場用的與在商場用的差不多，staff only！

㈦ 土木工程專業英語翻譯

養護混凝土
當一批混凝土第一次被混合，它們形成流體態，可以很容易地被倒進准備好的模具里。經過大約一小時時間形成一個剛性質量體，重約150磅/立方英尺。得到的水泥砂漿是水合物，即單個粒子的水泥吸收周圍的水分子進入他們的分子結構。當它們發生這樣的變化時，經過數分鍾，水泥結晶成一種剛性凝膠，類似於膠質，,隨著時間的流逝逐漸變為固體，形成結構緊密的晶體。水化的時間越長，混凝土的強度越大。這是標准(養護)工程的通常做法，因此，在經過28天養護期的基礎上計算混凝土的設計強度，盡管我們已經知道特定環境下的混凝土強度在四分之一個世紀或更長的時間內會繼續增長。
混凝土形成水合物和增加強度的時期是養護期。除非混凝土含有一定的水分，否則混凝土不能形成水合物或養護,。因此，在整個養護期，混凝土所有表面的必須保持濕潤。只要混凝土保持濕潤,養護將繼續進行，混凝土強度將不斷增大，密度增大，滲水性下降。
一旦混凝土完全脫水，水合作用即停止。通常是由於養護時間不足對混凝土表面造成負面影響。例如，一塊經過28天濕潤養護的混凝土的強度將兩倍於同樣的一塊只被養護3天的混凝土。
室外氣溫是保證合適的養護的一個非常重要的因素。如果氣溫太高，比如超過90°F，混凝土就會在水分完全蒸發前完成水化。過高的內部溫度也會影響正常的水合作用。被混合並放置在很熱的氣候環境下的混凝土，其強度遠不如被放置於低於70°F的氣溫中的那些，這主要是因為（在過高的溫度條件下）很難保持混凝土的濕潤。此外，那些在炎熱天氣里迅速成型的混凝土之後更容易產生裂縫，因為它在養護期間過度收縮，而不能承受由氣溫變化大而引起的拉力。
它也不能被放置在寒冷氣溫里，除非已經事先採用特殊措施使得混凝土溫度被保持在高於50°F,且（成型後）至少被放置4天。如果混凝土養護溫度低於50°F，它將永遠不會達到合適的硬度。如果混凝土在養成結束前被冷凍，它將被永久破壞。

自己翻譯的、

㈧ 工程專業英語翻譯

建議委託專業翻譯機構，通常是250元每千字，質量有保證。如果是參考，可以用谷歌、有道之類。

㈨ 工程翻譯的介紹

工程翻譯涉及的領域廣，專業性強。在建築行業中不僅涉及到專業的建築行業專業詞彙，同聲傳譯、同步口譯。是譯員在不打斷講話者演講的情況下，不停地將其講話內容傳譯給聽眾的一種口譯方式。其中同聲翻譯較為著名的是尚才翻譯公司。